Home > Emergency Eye Wash Products >

Emergency Plumbed Drench Hose Devices


Drench Hose with Stay-Open Ball Valve

Did You Know?

Drench Hose Units with Squeeze Valve

 Drench Hose Regulations

Tempered Water Blending Units

Why a Safety Tempered Water Blending Unit/Thermostatic Mixing Valve?

Home


ANSI Z358.1-2004

^

Home


Drench Hose with Stay-Open Ball Valve

 

 

 

 

 

 

 

 

Application:  Drench hose unit for wall mounting. Ideal for rinsing any part of user's eye, face or body. Under ANSI ANSI Z358.1-2004, drench hose units supplement but do not replace other types of emergency equipment.

Spray Head Assembly:  Single FS-Plus™ spray head. Spray head has "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  ˝" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Hose:  12' reinforced nylon retractable coiled hose. 180 PSI maximum working pressure.

Mounting:  Bracket with spring clips holds unit on wall.

Backflow Preventer:  In-line dual backflow preventer installed on inlet of hose (08G5018BP only).

  • Note: Check with code authority for compliance with local plumbing code.

Supply:  3/8" NPT female inlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for spray head.

VB  In-line vacuum breaker for installation between valve and spray head.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve, is designed specifically for Emergency Drench Hose devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G5018

Drench Hose with Stay-Open Ball Valve *
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Drench Hose devices.

 

^

Home


Drench Hose Units with Squeeze Valve

 

 

 

 

Application:  Drench hose unit for wall mounting. Ideal for rinsing any part of user's eye, face or body. Under ANSI Z358.1-2004, drench hose units supplement but do not replace other types of emergency equipment.

Spray Head Assembly:  Single FS-Plus™ spray head. Spray head has "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Valve closes when lever handle is released.

Hose:  8' reinforced PVC hose. 300 PSI maximum working pressure.

Mounting:  Wall mounted hook holds unit on wall.

Backflow Preventer:  In-line dual check backflow preventer installed on inlet of hose (08G5025BP only).

  • Note: Check with code authority for compliance with local plumbing code.

Supply:  3/8" NPT male swivel-type inlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for spray head.

FSH  8 ft. flexible stainless steel hose in place of PVC hose.

LC  Locking clip for valve handle. Valve stays open until locking clip is released.

VB  In-line vacuum breaker for installation between valve and spray head.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Drench Hose devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G5025

Drench Hose Units with Squeeze Valve *
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Drench Hose devices.

 

^

Home


Copyright 2005 © Talott First Aid & Safety. All rights reserved.