Home > Emergency Eye Wash Products > Emergency Plumbed Eye/Face Wash Devices >

Emergency Plumbed Eye/Face Wash Devices

Wall Mounted GS-Plus 4-Head Eye/Face Wash Units

Did You Know?

Replacement FS-Plus Eye/Face Wash Outlet Heads

Eye Wash Regulations

 

Why a Safety Tempered Water Blending Unit/Thermostatic Mixing Valve?

Emergency Eye Wash Menu

Plumbed Eye Wash Menu


ANSI Z358.1-2004

^

Emergency Eye Wash Menu

Plumbed Eye Wash Menu


Wall Mounted GS-Plus 4-Head Eye/Face Wash Units

 

 

 

 

 

 

 

Application:  WideArea™ eye/face wash for wall mounting. Four GS-Plus™ spray-type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face.

Spray Head Assembly:  Four GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  ½" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Bowl:  11½" diameter stainless steel bowl, 12" diameter ABS Plastic bowl.

Mounting: Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.

Supply:  ½" NPT female inlet.

Waste:  1¼" NPT female outlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for each spray head.

HS  Auxiliary hand-held drench hose for rinsing eyes, face or body.

SC  Self-closing ball valve.

  • Note: Eye/face washes with self-closing valves do not comply with ANSI Z358.1-2004.

GRN  Green ABS plastic bowl.

YEL  Yellow ABS plastic bowl.

T  Chrome plated brass tailpiece and trap with 1½" IPS waste connection.

TP  1½" OD Chrome plated brass tailpiece.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G1724

Wall Mounted GS-Plus 4-Head Eye/Face Wash Unit with 11½" Stainless Steel Bowl *
View Details

 

08G1724P

Wall Mounted GS-Plus 4-Head Eye/Face Wash Unit with 12" ABS Plastic Bowl*
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Eye Wash devices.

 

^

Emergency Eye Wash Menu

Plumbed Eye Wash Menu


Replacement GS-Plus and FS-Plus Eye/Face Wash Outlet Heads

All Guardian eye/face wash units utilize the unique FS-Plus spray heads (2½" diameter spray coverage) and the 4-Head eye/face wash units utilize the uniqe GS-Plus spray heads (1½" diameter spray coverage). These spray heads represent a truly important innovation in eye/face wash technology. GS-Plus and FS-Plus spray heads deliver water in a soft, wide spray rather than a solid, narrow stream. The user receives more water over a wider area than with any other type of outlet head.  In an emergency, contaminants are rinsed away quickly, gently and completely. 

These heads incorporate a variety of unique and important features:

  • "Flip Top" Dust Cover. Each outlet head is protected against dust and dirt by a "flip top" cover. Water flow swings the cover off the head. The cover is permanently attached to the spray head by a stainless steel pin; the cover cannot be removed or lost. The cover nests into the top of the outlet head, assuring that the cover always stays on the head when the unit is not in use. An optional stainless steel cover is also available.
  • Consistent, Balanced Flow. An engineered flow control located inside the FS-Plus spray head is calibrated to deliver 1.8 (GS-Plus) or 3.2 (FS-Plus) gallons per minute, at pressures from 20 to 100 PSI. The flow is consistent, regardless of line pressure. Since each head contains an individual flow control, the flow is evenly balanced between the heads.
  • Filtered Water. Each spray head contains an internal filter to remove particles and debris from the water flow. During rinsing, the user’s eyes and face are protected against any foreign matter which may be in the water or the plumbing lines.
  • Durability. The body and spray cover are molded from tough impact- and corrosion-resistant polypropylene.  The dust cover is molded nylon. They will stand up to even the harshest industrial environments.
  • Ease of Maintenance. Water often contains dissolved minerals and foreign matter which over time can clog up any outlet head. The GS-Plus and FS-Plus spray heads are designed so that all working components are contained in the head itself. All components are readily accessible for cleaning and maintenance. The eye wash unit itself never needs disassembly.

08GAP470001

Replacement GS-Plus Eye Wash Outlet Head with 1½" diameter spray coverage (Complete) - Each.

 

08G470004R

GS-Plus Replacement Filter - 6 per pkg.

 

08GAP470021

Replacement FS-Plus Eye/Face Wash Outlet Head with 2½" diameter spray coverage (Complete) - Each. 

 

08G470024R

FS-Plus Replacement Filter - 6 per pkg.

 

^

Emergency Eye Wash Menu

Plumbed Eye Wash Menu


Copyright 2005 © Talott First Aid & Safety. All rights reserved.