Home > Emergency Eye Wash Products > Emergency Plumbed Eye Wash Devices >

Emergency Plumbed Eye Wash Devices

Wall Mounted Eye Wash Units

Did You Know?

Pedestal Mounted Eye Wash Units

 Eye Wash Regulations

Deck Mounted 90º Swivel Eye Wash with Stay-Open Ball Valve

Why a Safety Tempered Water Blending Unit/Thermostatic Mixing Valve?

Deck Mounted Eye Wash/Drench Hose

 

Wall Mounted Eye Wash/Drench Hose

 

Wall Mounted Eye Wash/Drench Hose with Stay-Open Ball Valve

 

Replacement GS-Plus Eye Wash Outlet Heads

 

Click here for Plumbed Eye/Face Wash Devices

 

Emergency Eye Wash Menu


ANSI Z358.1-2004

^

Emergency Eye Wash Menu


Wall Mounted GS-Plus 2-Head Eye Wash Units

 

 

 

 

 

 

 

Application:  Eye wash for wall mounting. Two GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes.

Spray Head Assembly:  Two GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  ½" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Bowl:  11½" diameter stainless steel, or 12" ABS Plastic.

Mounting:  Heavy duty cast aluminum wall bracket with corrosion resistant powder coated finish.

Supply:  ½" NPT female inlet.

Waste:  1¼" NPT female outlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

BC  Stainless steel bowl cover. Cover protects unit against contaminants. Cover is automatically raised when unit is activated.

DC  Stainless steel dust cover for each spray head.

HS  Auxiliary hand-held drench hose for rinsing eyes, face or body.

SC  Self-closing ball valve.

  • Note: Eye washes with self-closing valves do not comply with ANSI Z358.1-2004.

T  Chrome plated brass tailpiece and trap with 1½" IPS waste connection.

TP  1½" OD chrome plated brass tailpiece.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G1814

Wall Mounted GS-Plus 2-Head Eye Wash Unit with 11½" Stainless Steel Bowl *
View Details

 

08G1814P

Wall Mounted GS-Plus 2-Head Eye Wash Unit with 12" ABS Plastic Bowl *
View Details

 

08G1813

Wall Mounted GS-Plus 2-Head Eye Wash Unit with Stainless Steel Bowl and Wraparound Skirt * - An attractive appearance by concealing the valve, drain, and piping.  They provide a clean, unobstructed installation which is ideally suited for laboratories, hospitals, and schools.
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve.

 

^

Emergency Eye Wash Menu


Pedestal Mounted GS-Plus 2-Head Eye Wash Units

 

 

 

 

 

 

 

 

Application:  Free standing, pedestal mounted eye wash. Two GS-Plus™ spray-type spray heads deliver a flood of water for rinsing eyes.

Spray Head Assembly:  Two GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  ½" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Bowl:  11½" diameter Stainless Steel, or 12" orange ABS Plastic.

Pipe and Fittings:  Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.

Supply:  ½" NPT female inlet.

Waste:  1¼" NPT female outlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for each spray head.

HFC  Hand and foot control. Eye wash is activated by flag handle or foot treadle.

HS  Auxiliary hand-held drench hose for rinsing eyes, face or body.

SC  Self-closing ball valve.

  • Note: Eye washes with self-closing valves do not comply with ANSI Z358.1-2004.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

 

08G1825P

Pedestal Mounted GS-Plus 2-Head Eye Wash Unit with 12" ABS Plastic Bowl*
View Details

 

08G1825

Pedestal Mounted GS-Plus 2-Head Eye Wash Unit with 11½" Stainless Steel Bowl*
View Details

 

08G1825HFC

Pedestal Mounted GS-Plus 2-Head Eye Wash Unit/Hand/Foot Control with ABS Plastic Bowl *
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve.

 

^

Emergency Eye Wash Menu


Deck Mounted 90º Swivel Eye Wash Unit with Stay-Open Ball Valve

Application:  Eye wash for mounting on counter next to sink. Spray heads swivel 90 degrees from storage to operational position. Water flow is activated by flag handle.

Spray Head Assembly:  Two GS-Plus™ spray heads. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  ½" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.

Mounting:  Unit may be mounted on right side (08G1806) or left side (08G1806LH) of sink. Furnished with locknut and washer for securing unit to countertop.

Construction:  Polished chrome plated brass.

Supply:  ½" NPT male inlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for each spray head.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G1806

Deck Mounted 90º Swivel Eye Wash Unit with Stay-Open Ball Valve *
View Details

 

08G1805

Deck Mounted "Auto Flow" 90º Swivel Eye Wash Unit - Activated automatically when unit is swung into position over the sink.  This unit has no flag handle.
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Eye Wash devices.

 

^

Emergency Eye Wash Menu


Deck Mounted Eye Wash/Drench Hose

 

 

 

 

 

 

Application:  Dual purpose eye wash/drench hose for deck mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the deck flange for use as a fixed eye wash, leaving user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body.

Spray Head Assembly:  Two GS-Plus™ spray heads mounted side-by-side. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing "hands free" operation. Valve stays open until locking clip is released.

Hose:  8' reinforced PVC hose. 300 PSI maximum working pressure.

Mounting:  Deck flange for countertop mounting. Flange has handle locator guide to position spray heads and handle facing forward at all times.

Backflow Preventer:  In-line dual check backflow preventer installed on inlet of hose (08G5022BP only).

  • Note: Check with code authority for compliance with local plumbing code.

Supply:  3/8" NPT male swivel-type inlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for each spray head.

FSH  8 ft. flexible stainless steel hose in place of PVC hose.

HG  Undercounter hose guide bracket to prevent hose from tangling or binding.

VB  In-line vacuum breaker for installation between valve and spray head.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G5022

Deck Mounted Eye Wash/Drench Hose *
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Eye Wash devices.

 

^

Emergency Eye Wash Menu


Wall Mounted Eye Wash/Drench Hose

 

 

 

 

 

Application:  Dual purpose eye wash/drench hose for wall mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eye wash, leaving user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body.

Spray Head Assembly:  Two GS-Plus™ spray heads mounted side-by-side. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  Forged brass squeeze valve activated by stainless steel lever handle. Valve has replaceable stainless steel seat for exceptional durability. Locking clip engages when handle is depressed, providing "hands free" operation. Valve stays open until locking clip is released.

Hose:  8' reinforced PVC hose. 300 PSI maximum working pressure.

Mounting:  Bracket with spring clips to hold unit on wall. Clips position spray heads and handle to face forward at all times.

Backflow Preventer:  In-line dual check backflow preventer installed on inlet of hose (08G5026BP only). Note: Check with code authority for compliance with local plumbing code.

Supply:  3/8" NPT male swivel-type inlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for each spray head.

FSH  8 ft. flexible stainless steel hose in place of PVC hose.

VB  In-line vacuum breaker for installation between valve and spray head.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G5026

Wall Mounted Eye Wash/Drench Hose *
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Eye Wash devices.

 

^

Emergency Eye Wash Menu


Wall Mounted Eye Wash/Drench Hose with Stay-Open Ball Valve

 

 

 

 

 

 

 

 

 

Application:  Dual purpose eye wash/drench hose for wall mounting. Unit meets the provisions of ANSI Z358.1-2004 as both an eye wash and a drench hose. Unit may be left in the mounting bracket for use as a fixed eye wash, leaving user's hands free. Alternatively, unit may be removed for use as a drench hose to rinse any part of user's eyes, face or body.

Spray Head Assembly: Two GS-Plus™ spray heads mounted side-by-side. Each head has a "flip top" dust cover, internal flow control and filter to remove impurities from the water flow.

Valve:  ½" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals

Hose:  12' reinforced nylon retractable coiled hose.  180 PSI maximum working pressure.

Mounting:  Bracket with spring clips to hold unit on wall. Clips assure that spray heads face forward at all times.

Backflow Preventer:  In-line dual check backflow preventer installed on inlet of hose (08G5014BP only).

  • Note: Check with code authority for compliance with local plumbing code.

Supply:  3/8" NPT female inlet.

Sign:  ANSI-compliant identification sign.

Available Options:

Contact us for order information for the following options only:

DC  Stainless steel dust cover for each spray head.

VB  In-line vacuum breaker for installation between valve and spray head.

Required by ANSI Z358.1-2004:

Unlike other mixing valves, the 08G3600 Thermostatic Mixing Valve is designed specifically for Emergency Eye Wash devices and precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.

08G5014

Wall Mounted Eye Wash/Drench Hose with Stay-Open Ball Valve *
View Details

 

08G3600

*Required:  Thermostatic Mixing Valve for Emergency Eye Wash devices.

 

^

Emergency Eye Wash Menu


Replacement GS-Plus Eye Wash Outlet Heads

  

All Guardian eye wash units utilize the unique GS-Plus spray heads (1½" diameter spray coverage). These spray heads represent a truly important innovation in eye wash technology. GS-Plus spray heads deliver water in a soft, wide spray rather than a solid, narrow stream. The user receives more water over a wider area than with any other type of outlet head.  In an emergency, contaminants are rinsed away quickly, gently and completely. 

These heads incorporate a variety of unique and important features:

  • "Flip Top" Dust Cover. Each outlet head is protected against dust and dirt by a "flip top" cover. Water flow swings the cover off the head. The cover is permanently attached to the spray head by a stainless steel pin; the cover cannot be removed or lost. The cover nests into the top of the outlet head, assuring that the cover always stays on the head when the unit is not in use. An optional stainless steel cover is also available.
  • Consistent, Balanced Flow. An engineered flow control located inside the spray head is calibrated to deliver 1.8 gallons per minute, at pressures from 20 to 100 PSI. The flow is consistent, regardless of line pressure. Since each head contains an individual flow control, the flow is evenly balanced between the heads.
  • Filtered Water. Each spray head contains an internal filter to remove particles and debris from the water flow. During rinsing, the user’s eyes and face are protected against any foreign matter which may be in the water or the plumbing lines.
  • Durability. The body and spray cover are molded from tough impact- and corrosion-resistant polypropylene.  The dust cover is molded nylon. They will stand up to even the harshest industrial environments.
  • Ease of Maintenance. Water often contains dissolved minerals and foreign matter which over time can clog up any outlet head. The GS-Plus spray heads are designed so that all working components are contained in the head itself. All components are readily accessible for cleaning and maintenance. The eye wash unit itself never needs disassembly.

08GAP470001

Replacement GS-Plus Eye Wash Outlet Head with 1½" diameter spray coverage (Complete) - Each.

 

08G470004R

GS-Plus Replacement Filter - 6 per pkg.

 

^

Emergency Eye Wash Menu


Copyright 2005 © Talott First Aid & Safety. All rights reserved.